CNC Controller
Product Features
- High response of the system
- Precise control over tool movement
- ISO standard G-codes and M-codes
- User-friendly control panel
- Simple editor for the ease of programming
- Powerful software with self-diagnostic and security characteristics
- “DRY RUN” - Part Program execution without motor actions
- 2 Axes Control (X and Z co-ordinate)
- Feed rate 10 – 540 mm/min
- Accuracy of +/- 20 microns of X-axis & +/- 50 microns of Z-axis
- Precision 0.01 mm
- Separate key to set the feed-rate for tool movement
- Four Jog Keys to move X and Z stepper motor in X+, X-, Z+ and Z- directions
- Part Program size from 000 to 999 blocks
- Memory to store one program
System Features
- 2 Axes Control (X and Z co-ordinate)
- 2 axes X and Z are controlled by 2 separate stepper motors with 200 steps/rev and resolution of 0.05mm (50 microns)
- Spindle driven by DC motor
- Operating range 60 - 1600 RPM
- Job 0 positioning
- Machine 0 positioning – provided at extremities of +Z and +X axes
- 15 ISO Standard G Codes and 6 M Codes
Security Features
- Hardware Security
- Software Security
Hardware Security
- Four limit switches are provided to limit the tool movement in both the axis
- Thermal cutout and overload protection for the spindle
- Emergency stop for severe failure conditions (Stop the whole process and resume from where it left This depends upon user choice)
Software Security
- Self-Diagnostics at the start of machine
- On board Diagnostics
Self-Diagnostics at the start of machine
- Motors working condition check
- Limit switches status check
- Detect all failures and then report. Report will be displayed on LCD
- Stops the activity of the System till failure is corrected
- The failure can be corrected by going into Manual Control mode
Self-Diagnostic test is an option for a user. When main menu is displayed user can select Self-Diagnostic or he can perform operations either in Automatic mode or Manual mode.
On board Diagnostics
- Stop if range exceeds in either of the Axis
- Overload protection (spindle motor)
- Data validation
You can download - User Manual ( PDF )